|
| remote control touch dimmer
| |
Instruction
" Thanks for using led controller FUT-005L manufactured by 1st Tech.
One package includes£ºone controller£¬one remote control(without battery)
one core-end terminal£¬one usage instruction.
Please contact your supplier if any problems occur before you use. "
After-sales service
we claim to offer free maintenance or change new product if any problems occur within one year.
The buyer should pay for the maintenance due to unfollowing the instructions even within one year. The maximum duty of our company is to change the product with the same item No. and quantity if any damage occur.
1. Incorrect operation mainly due to unfollowing instructions.
"2.Damage caused by uploading, fixing,changing circuit ,connecting or changing the
chips unprofessionally. "
3.Damage caused by shipping,shaking,dropping or water inflowing after buying.
4. Damage caused by natural disasters suchas,earthquake,fire,flood,thundering,environmental pollution or abnormal voltage.
5.Damage caused by high temperature,moisture,hazardous chemicals or inappropriate maintenance.
6.Our products have been updated newly.
Safe instruction
Please follow the instructions to use safely.
Attention! Operate Carefully! Please read the following tips carefully.
1¡¢ Donot install the product in areas with thundering,strong magnetic and high pressures.
2¡¢ Make sure the connection is right and firmed in case of fire accident caused by short circuit.
3¡¢Please install the controller with ventilation to make sure the temperature is appropriate.
"4¡¢Please check whether the input voltage,power supply(constant pressure)
acord with the requirements. "
5¡¢Please donnot connect the power before connection.
6¡¢Please contact the supplier when problems occur.Don¡¯t maintain by yourself.
7¡¢The Instruction is for this Item Only,no notification if any amendments.
Brief introduction
"
FUT-005L is a multi-function Touching LED Controller. It adopts the most advanced PWM reomte control technology ,can control all the full color LED lighting with Three lines two circuits(common anode),with 50 grades of brightness adjusting.it widely applies to LED strip light and dimmable LED lighting,etc
"
¢ñ£ºTechnical Parameters(remote control):
1:Power supply: AAA battery * 3pcs
2:Cover Material:ABS
3£ºFabrication processing: multicolour printing & UV varnish
¢ò£ºTechnical Parameters(controller)
1. Working voltage:DC12V/24V
2. Output control: 2 circuits
3. Control current£º6A/circuit
4. Connecting mathod: common anode
5£ºWireless frequency£º433.92MHz
6. Receiving range:20meters
¢ó£ºFunctions of Keys
1. Key 1: on
2. Key 2: off
3. Key 3:highest brightness
4. Key 4: medium brightness
5. Key 5: lowest brightness
¢ô. How to use
1. Use your finger to touch the color ring ,you can change the brightness from the highest to the lowest (100%-1%,50 grades to adjust).
2. Resume fuction. The previous settings will be resumed while power on again.
"3. Matching code
Press Key 3once within 3 seconds when power on again,the light will blink 3 times if matching is successful.
Clearing Code,Press Key 3 five times within 3 seconds when power on again,the light will blink 6 times if clearing is successful."
¢õ. Caution
Please don¡¯t touch or press the color ring while loading the battaries to protect the sensitiveness. Please use the remote controller 3 seconds after the battaries are loaded.Please reload the battaries when you find the color ring is not sensitive.
|
|
